Description

The Ronix Relik boot is designed for riders that want the most mobility out of a closed toe boot. A lower cut boot, using the all-new new Intuition + liners are now even more comfortable, along with a lightweight shell material for the most in side to side latitude.

 

Parks Bonifay’s custom orthotic freestyle inspired signature footwear has more lateral freedom than the One or Cell boot, without sacrificing heel hold down. No excuse for compromised style with the freedom of a pair of new Relik boots.

 

Built on the Ronix revolutionary baseless plate system, the lightest heat formed custom fit boot comes with a plasmatic portion of alloy tipping the scale at a slight 1.6 lbs.

 

Often imitated - never duplicated, Parks Bonifay soft density heat formed and custom fit Intuition lined boot continues to be upgraded every year. Lightweight, preformed, heat moldable Intuition liners just fit better right out of the box and custom mold unlike any other type of moldable boots out there.

 

Ronix exclusive Intuition wake liners have set the standard for performance driven, comfort footwear taking only 5 minutes on the cooker to customize a pair of boots to the exact shape of your foot for a lifetime.

 

Flat foot, high arch, narrow heel, or cankles – whatever the dimension of your foot, Ronix intuition liners were made to be cranked up to 120 degrees Celsius and custom cooled to a rider’s hoof. Intuition foam can also be re-heated and molded more than once without damaging the structural integrity or quality. The ultimate in high quality liners, resistant to packing out. Now you have an excuse why you don’t have to share your custom orthotics.

 

Just stiff enough to have board response for a session of quick reacting soul turns and the mobility for him to tweak out his historical 1260.

 

This is the same boot Parks Bonifay himself uses and is now crafted from Ronix's even more comfortable Intuition + Liner. The Ronix Relik boot is designed for riders that want the most mobility out of a closed toe boot. A lower cut boot, using the new Intuition + liners are now even more comfortable, along with a lightweight shell material for the most in side to side latitude.

 

Finally, the Ronix Team utilizes their patent pending baseless system - the original low profile design with superior board control and ultra light for reduced overall swing weight - giving you the closest foot to board connection in making it perfect for all-round wake and kiteboarding.

 

Features:

 

Baseless System:

Ronix’s revolutionary baseless system - the original low profile design has superior board control and is ultra light for reduced overall swing weight - often imitated never duplicated.

 

The only separation between a rider's foot and a Ronix board is the high impact shock absorbing footbed. The Ronix Baseless System makes their boots 1/3 lower in height and 1/3 lighter!

 

The Ronix superior super rigid chassis mounts to the Ronix universal 6" hole pattern reducing heel / toe lift and maximising energy transfer.

 

Heat Molded Customisable Liners:

New Intuition + Liner - preformed heat moldable - the ultimate customizable liners are now even more comfortable and less prone to packing out. Ronix Liners are made from thermo-forming closed cell foam. These tiny cells of bubbles create a high cross linkage between molecules in each cell wall. This means that the foam does not allow gases to migrate, which would change the shape of the foam.

 

Lightweight, preformed, heat moldable Intuition liners just fit better right out of the box and custom mold unlike any other type of moldable boots out there.

 

Ronix exclusive Intuition wake liners have set the standard for performance driven, comfort footwear taking only 5 minutes on the cooker to customize a pair of boots to the exact shape of your foot for a lifetime.

 

Flat foot, high arch, narrow heel, or cankles – whatever the dimension of your foot, Ronix intuitin liners were made to be cranked up to 120 degrees Celsius and custom cooled to a rider’s hoof. Intuition foam can also be re-heated and molded more than once without damaging the structural integrity or quality. The ultimate in high quality liners, resistant to packing out. Now you have an excuse why you don’t have to share your custom orthotics.

 

All of this results in the ability to mold the foam into a specific shape when heated and the foam will retain that shape when cooled with reduced heat-related shrinkage. High quality memory, and resistance to packing out. Intuition foam can also be re-heated and molded more than once without damaging its structural integrity or quality.

 

Soft Density Liner:
A soft density liner is also perforated offering the most mobility in a high-end boot.

 

Double Lasted:
Double lasted with the most low profile and compact lasts eliminate excess material and deliver optimal energy transfer between boot and board.

 

Building a last of a wakeboarder’s foot and simulating the movement while riding is the most critical tool in creating boots that fit properly. A last is an aluminum cavity that replicates every component of a foot determining the shape and size of the liner and a finished boot. This foundation is developed through an extensive R&D process based on what we determine will produce the best in fit and performance. Double lasting creates an exact fit from your foot to the shell of the boot for the best in comfort and response. Ronix use the most compact and low profile lasts to reduce bulk and eliminate any unnecessary material.

 

Part One - Ronix's first unique lasting process is molding the liner around a last designed to the shape of an actual foot and leg. This step ensures the inside of the liner will have a great fit right out of the box. These are formed inside an actual shell to create the perfect net fit between liner and boot.

 

Part Two - The second part of Ronix's lasting process is molding the inside of the shell. This creates a liner to shell coupling that eliminates any “dead space” or “hot spots”. After the second lasting, the previously molded liners are inserted into the shell and the boots are ready to ride.

 

Removeable J-Bars:
Removable J-bars allowing you to customize your heel pocket

 

Feetbelt:

Secures your ankle and maximizes heel hold. The feetbelt seats your foot into the correct position in the boot by drawing your foot into the heel pocket. These feetbelts float free of the outer shell to conform to the exact dimensions of your ankles. Heel hold down to a new level, don't worry you won't get pulled over if your feetbelt isn't buckled.

 

R.A.D Foam:

Radder dampening than ever.

 

Tooless Mounting System:

Throw your screwdriver away with our tool less mounting system.

 

Ronix Ecology:

Ronix have also eliminated the use of PVC solvents which are potentially hazardous to the surroundings and human health. Instead, Ronix are using more expensive, higher quality materials that are easier on the environment.

 

Ronix Relik Wakeboard / Kite Wake Bindings:

 

 

Why go to 6" Wakeboard Boot Plates?
6” patterns are now standard on many bindings and boards. 6” binding plates are lighter, stronger and have less torsional flex.

 

* Riders can choose to use both inside and outside mounting locations on Strata track boards. Four additional Strata track t-nuts will be required.

 

You have 6” binding plates and a wake or board with an 8” hole pattern. Are they compatible?
Yes, Liquid Force, CWB and Ronix have binding plate extenders that allow you the full range of stance options.

 

How do I measure my inserts?
Wakeboard Insert Spread refers to the hole pattern on your wakeboard or kiteboard. It is the distance from any hole in the outer group of holes to the corresponding hole in the inner group for each boot mounting area (either Left or Right). Both Hyperlite Strata and Slingshot Fastrack Mounting Systems have infinite stance options.

 

Ronix Relik Boot / Shoe Sizes
US	6-7	8	9	10	11	12	13-14
UK	5-6	7	8	9	10	11	12-13
Europe	38-39	41	42	43	45	46	47-48
Japan	24-25	26	27	28	29	30	31-32

* Enter quantity required and click 'Buy Now' Button *

 

Ronix Relik Boot Wake / Kite Bindings RRP - £339.00 Ronix Relik Boots - UK Size 11: - £199.00

Specs

Specifications:

 

Baseless System:

Ronix’s revolutionary baseless system - the original low profile design has superior board control and is ultra light for reduced overall swing weight - often imitated never duplicated.

 

The only separation between a rider's foot and a Ronix board is the high impact shock absorbing footbed. The Ronix Baseless System makes their boots 1/3 lower in height and 1/3 lighter!

 

The Ronix superior super rigid chassis mounts to the Ronix universal 6" hole pattern reducing heel / toe lift and maximising energy transfer.

 

Heat Molded Customisable Liners:

New Intuition + Liner - preformed heat moldable - the ultimate customizable liners are now even more comfortable and less prone to packing out. Ronix Liners are made from thermo-forming closed cell foam. These tiny cells of bubbles create a high cross linkage between molecules in each cell wall. This means that the foam does not allow gases to migrate, which would change the shape of the foam.

 

Lightweight, preformed, heat moldable Intuition liners just fit better right out of the box and custom mold unlike any other type of moldable boots out there.

 

Ronix exclusive Intuition wake liners have set the standard for performance driven, comfort footwear taking only 5 minutes on the cooker to customize a pair of boots to the exact shape of your foot for a lifetime.

 

Flat foot, high arch, narrow heel, or cankles – whatever the dimension of your foot, Ronix intuitin liners were made to be cranked up to 120 degrees Celsius and custom cooled to a rider’s hoof. Intuition foam can also be re-heated and molded more than once without damaging the structural integrity or quality. The ultimate in high quality liners, resistant to packing out. Now you have an excuse why you don’t have to share your custom orthotics.

 

All of this results in the ability to mold the foam into a specific shape when heated and the foam will retain that shape when cooled with reduced heat-related shrinkage. High quality memory, and resistance to packing out. Intuition foam can also be re-heated and molded more than once without damaging its structural integrity or quality.

 

Medium Density Liner:
A medium density liner blending mobility and precision board control.

 

Double Lasted:
Double lasted with the most low profile and compact lasts eliminate excess material and deliver optimal energy transfer between boot and board.

 

Building a last of a wakeboarder’s foot and simulating the movement while riding is the most critical tool in creating boots that fit properly. A last is an aluminum cavity that replicates every component of a foot determining the shape and size of the liner and a finished boot. This foundation is developed through an extensive R&D process based on what we determine will produce the best in fit and performance. Double lasting creates an exact fit from your foot to the shell of the boot for the best in comfort and response. Ronix use the most compact and low profile lasts to reduce bulk and eliminate any unnecessary material.

 

Part One - Ronix's first unique lasting process is molding the liner around a last designed to the shape of an actual foot and leg. This step ensures the inside of the liner will have a great fit right out of the box. These are formed inside an actual shell to create the perfect net fit between liner and boot.

 

Part Two - The second part of Ronix's lasting process is molding the inside of the shell. This creates a liner to shell coupling that eliminates any “dead space” or “hot spots”. After the second lasting, the previously molded liners are inserted into the shell and the boots are ready to ride.

 

Removeable J-Bars:
Removable J-bars allowing you to customize your heel pocket

 

Feetbelt:

Secures your ankle and maximizes heel hold. The feetbelt seats your foot into the correct position in the boot by drawing your foot into the heel pocket. These feetbelts float free of the outer shell to conform to the exact dimensions of your ankles. Heel hold down to a new level, don't worry you won't get pulled over if your feetbelt isn't buckled.

 

R.A.D Foam:

Radder dampening than ever.

 

Tooless Mounting System:

Throw your screwdriver away with our tool less mounting system.

 

Magenetic Lace Cover:

Magnetic attached lace cover - throw the laces to your boot and away you go!

 

Silicon Ink:

Silicon ink in heel area for greater hold.

 

Ronix Ecology:

Ronix have also eliminated the use of PVC solvents which are potentially hazardous to the surroundings and human health. Instead, Ronix are using more expensive, higher quality materials that are easier on the environment.

Reviews

Be the first to review this product! >>>>

 

Submit a Product Review for this product >>