Kiteboarding Acid HRD Carbon Kite Board >>
F-One Acid HRD Carbon Kiteboard:
The F-One Acid HRD Carbon is the ultimate for new school freestylers. Short and wide up to the tips, with extreme pop for better jumps and landings. Its double concave will suppress any leg splash and absorb vibrations during high impact landings.
The F-One Acid HRD Carbon is also ultralight and allows sharp edging, great release and insane pop. Light, sharp and responsive under your feet, this Acid HRD Carbon will get you launching huge tricks!
To meet the requirements of today’s freestyle, F-One engineers have altered the choice of materials: a new type of wood is used for its core to enhance the impact zones and better absorb shocks while maintaining an optimum weight.
The ACID HRD Carbon is at its best for low kite moves and is forgiving during landing, even on non-flat spots. Light and lively under your feet, incisive, the ACID is compact and will put you in confidence to start new tricks.
Short and wide all the way to the tips, the F-One Acid HRD Carbon produces the best pop, greatly helped by the Dynamic Flex that gives right back the energy loaded during the take off. Well balanced on its rocker line and bottom shape, the Acid HRD Carbon is designed to facilitate landing and give your body a lesser impact.
The Direct Drive technology with full wood core, with its legendary resistance makes sure you can rely on your board at all times.
New school freestyle is the discipline where attention to the pads is essential. Low kite tricks will put a lot more energy on the landing and our 3D molded Platinium Pads offer incredible comfort and energy diffusion.
The under heel area is made out of two foam density, the top part being softer to absorb the little shocks and the bottom part harder to soak up the big ones!
Riding Style: New School Manoeuvres
Skill Level: Beginner / Expert
F-One Acid Kiteboard - Length / Width:
F-One Platinum 3 Accessory Pack available as a separate accessory:
Features / Technology:
Helical Rail Design:
The helical rail design(H.R.D.) is a tri-part rail which delivers insane precision, advanced directional stability, surreal grip and ultimate comfort, all unknown as yet in the world of Twin-Tips.
In the feet areas, the rail profile is very thick and inverted which creates two support zones that stop any bouncing effect. It also generates impressive vertical lift that offers early planing and sensational drive. Its sharpened top edge also reduces water spray towards the eyes and legs.
On the central part, the rail is thin and sharp, allowing edging, jumping at any time, also delivering a huge grip and outstanding pop. Towards the tip of the board, the rail returns to its original thin shape to ensure grip during take-off and pop. Using the new HRD features landing any jump or trick as never been so simple. The HRD rail provides new performance and a truly unknown riding sensation like riding above the water. The 16 mm thick rail also strongly increases the resistance of the structure and locks the twist of the board.
Concave Step Design:
The combination of a bottom concave and a channel which tightens the central part, allows the TX to go planning in an instant, with strong upwind potential.
The concave absorbs the chop and improves
its grip on the water. The channel enhances the flow of the
water and relieves the pressure on
The wood forms the heart of your board and gives it most of its mechanical pro-perties: strength, flex and resilience (abi-lity to return to its original shape).
Each year, in order to master these properties, we seek to optimize its distribution, parti-cularly in terms of thickness.
The Direct Drive technology is present on our boards since 2001, and refers to a board with minimal thickness, a 100% wood core and a 100% fibreglass envelope. These interlocking elements meet the F-ONE standards for a kite board and pro-vide maximum durability.
The Direct Drive translate into a pre-cise board, quick and active as it erases the flaws of the water surface, collecting its energy and giving it back for the best performance. The feeling of riding a rock solid board always in contact with the water without suffering from it is even greater.
3D Deck Structure:
Board flex is tuned through both materials and shape.
Hybrid Cap Rail:
Hybrid Cap Rail is a construction process which cleverly combines the sleek lines and perfect grip of a cap construction rail with the toughness and durability of an ABS rail.
The patented UNIBOX system and RESPONSE fins have a radical effect : the asymmetrical profile improves the general ride and early planing.
However, it is the flex of the RESPONSE fins that gives amazing rail-grip as well as pop and forgiveness on heavy freestyle landings.
Help Centre Topics
Copyright © 2018, Powerkiteshop :: All Rights Reserved