Description

Master Jack is Shinn Kiteboarding's Young Guns board and is far from being an adult’s board shrunk in the wash.

 

Boundless enthusiasm and motivation demands a board that can be ridden fast and loose and forgives errors in the rider’s technique.

 

Jack is not a kid’s board but a performance design created from the same high technology as all the Shinn range and finished to the same unrivalled level of perfection.

 

Many small boards are created using rockers designed for longer decks resulting in flat tips prone to nose diving and tripping. The Shinn Master Jack features a specific XS rocker meaning it has full tip radius in proportion to it's reduced sizing. The outline also presented challenges due to the relatively small tip and tail surface areas.

 

Shinn maintained a straighter outline through the central section to give the speed and grip that younger riders enjoy however increased the curve radius in the tips to provide extra forgiveness should enthusiasm levels exceed the handling skills of the rider! As with all Shinn boards, Master Jack features a central concave washing out to flat areas in the tips to provide both earlier planning and extra flex control.

 

Stars of the future need all the help possible to succeed and Master Jack is proof of our commitment to them. Complete with resized smaller footstraps.

 

Footbed and Straps:
The connection between rider and board can make or break the quality of your ride. Of course they should look slick but only after the function is perfect.

 

Shinn Kiteboarding's deep section EVA cushioning ensures luxurious comfort even during the harshest landings, whilst a carefully placed section of memory foam adjusts the surface to the shape of your feet after only a couple of hours riding. Multi-position fixation points allow you to fine tune your stance to perfection. The Shinn footstrap has been shaped to provide maximum grip on your foot with minimal pressure points and complete ease of adjustability.

Fins:
All Shinn twin tips are supplied with high visibility G10 fins and deck protection plates. Shaped exclusively for us from G10 Epoxy (for unsurpassed durability), this 53mm shape provides exceptional grip for it's size whilst still offering great manoeuvrability.

 

Core Construction:
What's inside your board will make a huge difference to how it performs. There is a lot of talk about flex but the mount of flex is just the tip of the iceberg, what"s more important is where the board flex"s and how fast it responds after that flex.

 

Each Shinn twin tip has a carefully engineered core that optimises these characteristics and enhances them for the target rider. Core materials, glass layup and mould shaping are all factors that help us in this area but the heart of every Shinn twin tip is comprised 'mostly' of an Alabasia wood core.

 

No other core material offers the same blend of consistent flex over extended periods of time, feather light weight and near indestructible durability (not to mention environmental friendliness).

 

Mould Shaping:
Shinn Kiteboarding needed a special mould that replicated the flex patterns of the Shinn FR8 mould but in smaller sizes. With short and narrow tips Shinn found that creating steps in the mould stiffens the tail section too much so they used a smooth thickness transition profile. Smooth and consistent flex throughout the tail section of this mould allows maximum control for less skilled and lighter riders.

 

Rocker and Outline:
To create a board for the stars of the future Shinn first looked at the rocker. Many small boards are created using rockers designed for longer decks resulting in flat tips prone to nose diving and tripping.

 

Master Jack features a specific XS rocker meaning it has full tip radius in proportion to it's reduced sizing. The outline also presented challenges due to the relatively small tip and tail surface areas.

 

Shinn maintained a straighter outline through the central section to give the speed and grip that younger riders enjoy however increased the curve radius in the tips to provide extra forgiveness should enthusiasm levels exceed the handling skills of the rider! As with all Shinn boards, Master Jack features a central concave washing out to flat areas in the tips to provide both earlier planning and extra flex control.

 

**Price include footstraps, footbeds, fins and grab handle**

Shinn Kiteboarding Master Jack 2011 KiteBoard 120 x 36: £459.00 125 x 38: £459.00

Specs

Length	Width	Core Technology	Inserts	Stance Width	Fin Size	Fin Material
120	36	Alabasia Wood Core	M6	41-46cm	53mm	G-10 Epoxy
125	38	Alabasia Wood Core	M6	41-46cm	53mm	G-10 Epoxy

 

Features

Shinn Kiteboarding Master Jack 2011 Technical Features:

 

 

Footbed and Straps:
The connection between rider and board can make or break the quality of your ride. Of course they should look slick but only after the function is perfect.

 

Shinn Kiteboarding's deep section EVA cushioning ensures luxurious comfort even during the harshest landings, whilst a carefully placed section of memory foam adjusts the surface to the shape of your feet after only a couple of hours riding. Multi-position fixation points allow you to fine tune your stance to perfection. The Shinn Sneaker footstrap has been shaped to provide maximum grip on your foot with minimal pressure points and complete ease of adjustability.

Fins:

All Shinn twin tips are supplied with high visibility G10 fins and deck protection plates. Shaped exclusively for us from G10 Epoxy (for unsurpassed durability), this 53mm shape provides exceptional grip for it's size whilst still offering great manoeuvrability.

 

Core Construction:
What's inside your board will make a huge difference to how it performs. There is a lot of talk about flex but the mount of flex is just the tip of the iceberg, what"s more important is where the board flex"s and how fast it responds after that flex.

 

Each Shinn twin tip has a carefully engineered core that optimises these characteristics and enhances them for the target rider. Core materials, glass layup and mould shaping are all factors that help us in this area but the heart of every Shinn twin tip is comprised 'mostly' of an Alabasia wood core.

 

No other core material offers the same blend of consistent flex over extended periods of time, feather light weight and near indestructible durability (not to mention environmental friendliness).

 

FS Mould Shaping:
This FS mould is designed to provide you with the ultimate in comfort and control. It's unique ovalized, central platform creates extreme amounts of tail flex through both axis yet maintains rigidity underfoot to ensure planning performance and upwind ability are un-hindered.

 

Constant Curve Rocker and Outline:
Some years ago this rocker would have been considered to be slow to plane and poor upwind but advances in flex control, concave hull shapes and of course kites now mean it can be used to provide un-paralleled control, limitless grip and completely spray free riding in all conditions.

 

The outline of your board works in conjunction with the rocker to define the way it will perform.

 

In freestyle - this outline style features more curve radius between the feet leading into straighter, larger diameter curves in the tip and tail. On the water this translates into strong edge grip, aggressive POP and fast turning when applying pressure equally through both feet.

 

Reviews

Be the first to review this product and get 10% off! >>

 

Submit a Product Review for this product >>