- Home
- Kites
- Buggies
- Boards
- Kitesurf
- Accessories
- Safety
- Harnesses
- Wetsuits
- Wake
- Contact
Accessories > Wakeboards > Ronix > Ronix Bill 2011 Wakeboard >
|
|||
|
Accessories > Wakeboards > Ronix > Ronix Bill 2011 Wakeboard > |
|||
Ronix
Bill 2011 Wakeboard >>
Fins: Comes complete with 4 x Fibreglass 1.0" Fins and 4 x Fibreglass 0.8” Slider Fins.
Slider Fins:
Wake / Kite Binding Stance: When mounting your bindings on a wake or kiteboard, it is important to start off with a wider stance when learning, and then adjust it once you are more comfortable on the board. The wider stance gives you more stability and most people will always ride with their feet angled outward, also known as a duck stance.
If you feel pressure on either or both knees, or on the outside of your feet, the chances are your feet are parallel or straight on the board and you need to angle them outward a little more.
Try wakeboarding or kiteboarding with several different stances to find out what works best for you.
How is a kiteboard different from a wakeboard? Wakeboarding is a great way to keep up with your skills when there is not enough wind for kiteboarding. Your skills are already honed for wakeboarding and you will have no trouble getting up and moving.
Kiteboards may look the same but they are very different from one another. A kiteboard has a concave bottom unlike the convex bottom of a wake board. Kiteboarders constantly ride on the edge of their board a lot like a snowboarder carving down a slope. The concave bottom helps kiteboarders to cut into the water holding a better edge, and helping them to stay upwind and are also designed to handle waves.
Wakeboards are designed to be thrusted off the tail, riding behind a a boat or cable e at higher speeds and typically on flat water. They are typically heavier due to the bindings but act as a counter weight aiding rotation speed in the quick jumps off a boat /cable wake. Their stiffness and rocker are designed for hard landings.
For beginners a wakeboard with a lot of rocker will feel loose, but it will teach you how to edge correctly rather than relying heavily on fins. In contrast, less rocker allows wakeboards to move faster, hook up better and become more aggressive. The wakeboard rider can be more aggressive with his turns and really edge hard through the wake.
If you’re the type of wakeboard / kiteboarder who loves to turn fast, go big and land out in the flats but you ride a bigger, steeper wake, try to find wakeboards with medium rocker. The slower, smoother and more wake-to-wake your style is, the more rocker you need in your wakeboards.
How cable park wakeboarding can help your kiteboarding - Aaron Hadlow
|
|
User Rating:
|
DescriptionThe Ronix Bill 2011 Wakeboard is designed for the movement of longer rope lengths, bigger wakes and faster boat speeds comes equipped with Ronix's revolutionary Sintered Base material.
Leave it to Bill to design a series that has a different skate like feel on the water for water jockey sledders that can only be described as a versatile ride behind the boat, or at a cable park.
Created with a shape for the modern day wakeboarder and an improved drag coefficient and a super fast hybrid rocker with a higher degree of angle in the tip/tail. Bill loves to indulge in all sorts of big words like drag coefficient. He’s a smart guy and knows what the next generation of riders are looking for in a really fast ride.
Comes complete with a new wider stance option for more board control on sliders.
Features:
Centred Variable Edge Rails: A 10” semi full rail and a subtle bevel create a controlled accelerated edge transfer with a forgiving bottom design.
Tip / Tail Variable Edge Rails: A sharper rail and bevel with more of a locked down feel once on edge.
Sintered Base: The most durable non-stick compound Ronix have ever tested on rails without loosing any glide speed on the water. This exclusive base was formulated from a powder by heating the material in a sintering furnace below it's melting point until the particles bond to one another.
A higher purity of a compound that preserves it's bond over time. No obstacle is safe at cable parks with the Ronix jib friendly material!
Rocker and Base Features: An exaggerated rocker profile designed with a later arc (closer to the tip / tail) and a higher degree arc angle (10.3°), make for a straight up explosive pop off the wake. This style of rocker creates instant energy the second the tip hits the wake creating a more intense buck with less effort.
Specifically designed to mesh with Ronix’s Carbon R3 Technology – for durable flex and strength – you’ll experience everything the wake has to offer day after day.
Thin Profile: Reducing Swing Weight with a unique 45° angled tip / tail profile.
Simple Bottom Shape Design: This rockerline leaves the wake and lands with more forward momentum so there is no need for big channels to reduce the impact on landings slight convex belly designed to land with more forward momentum
Carbon Techology:
Krypto Cable:
Combined with Ronix's monocoque laminated glass, this cable makes the sidewalls of the board the strongest part of the board.
The strength of the Mod Pour and Carbon R3 technology means a board will want to maintain its intended rocker line through a transition, trough and landing impact beyond a conventional layup. A torsionally stiffer ride allowing the board to create more angle and speed out of a turn by preventing the profile from flexing side to side.
Mod Pour Construction:
Artwork:
Slider Fins:
Fins: Comes complete with 4 x Fibreglass 1.0" Fins and 4 x Fibreglass 0.8” Slider Fins.
Ronix Bill 2011 Wakeboard:
Why go to 6"
Wakeboard Boot Plates?
* Riders can choose to use both inside and outside mounting locations on Strata track boards. Four additional Strata track t-nuts will be required.
You have 6”
binding plates and a wake or board with an 8” hole pattern.
Are they compatible?
How do I measure my
inserts?
Highlighted Features:
SpecsSpecifications:
Centred Variable Edge Rails: A 10” semi full rail and a subtle bevel create a controlled accelerated edge transfer with a forgiving bottom design.
Tip / Tail Variable Edge Rails: A sharper rail and bevel with more of a locked down feel once on edge.
Sintered Base: The most durable non-stick compound Ronix have ever tested on rails without loosing any glide speed on the water. This exclusive base was formulated from a powder by heating the material in a sintering furnace below it's melting point until the particles bond to one another.
A higher purity of a compound that preserves it's bond over time. No obstacle is safe at cable parks with the Ronix jib friendly material!
Rocker and Base Features: An exaggerated rocker profile designed with a later arc (closer to the tip / tail) and a higher degree arc angle (10.3°), make for a straight up explosive pop off the wake. This style of rocker creates instant energy the second the tip hits the wake creating a more intense buck with less effort.
Specifically designed to mesh with Ronix’s Carbon R3 Technology – for durable flex and strength – you’ll experience everything the wake has to offer day after day.
Thin Profile: Reducing Swing Weight with a unique 45° angled tip / tail profile.
Simple Bottom Shape Design: This rockerline leaves the wake and lands with more forward momentum so there is no need for big channels to reduce the impact on landings slight convex belly designed to land with more forward momentum
Carbon Techology:
Krypto Cable:
Combined with Ronix's monocoque laminated glass, this cable makes the sidewalls of the board the strongest part of the board.
The strength of the Mod Pour and Carbon R3 technology means a board will want to maintain its intended rocker line through a transition, trough and landing impact beyond a conventional layup. A torsionally stiffer ride allowing the board to create more angle and speed out of a turn by preventing the profile from flexing side to side.
Mod Pour Construction:
Artwork:
Slider Fins:
Fins: Comes complete with 4 x Fibreglass 1.0" Fins and 4 x Fibreglass 0.8” Slider Fins.
Why go to 6"
Wakeboard Boot Plates?
* Riders can choose to use both inside and outside mounting locations on Strata track boards. Four additional Strata track t-nuts will be required.
You have 6”
binding plates and a wake or board with an 8” hole pattern.
Are they compatible?
How do I measure my
inserts?
Highlighted Features:
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Copyright © 2012, Powerkiteshop :: All Rights Reserved |
|||
|
|
Power Kite - Kite Buggy - Land Boards - Kite Board - Kite Surfing - Kiteboarding Wetsuits - Site Map - Visit Power Kite Shop |
Translate Page: | 
 |
0%
Interest Finance Option
