Description

The Cabrinha Convert bow kite is a reflection of the people who do our sport. Rugged and technical but with a sense of ease. The Convert is simply the easiest and most secure way to get yourself up and riding in the shortest amount of time, with the least amount of hassles.

 

The Cabrinha Convert is a full scale Bow kite from leading edge to trailing edge. This design delivers an incredibly wide wind range, stable easy handling and perhaps the most important feature on any kite ..... an enhanced relaunch function that is second to none.

 

Relaunch on command

The Convert’s relaunch capability is so easy that your hands never have to leave the control system. By simply pointing the end of the control system towards the kite, the wing tip will rise off of the water and launch the kite into the sky. Unlike other relaunch methods, The Convert allows you to decide when to launch the kite and which direction it goes into the air. Its simple... and it keeps the control in your hands... where it should be.

 

Two of the elements credited for the Convert’s amazing relaunch are: The curved shape of the leading edge and the swept wing tips. Together they allow the kite to “unstick” by reducing contact to the water or snow when the leading edge is face down. The constant curvature of the leading edge allows the kite to easily roll onto a wing tip and lift off the water.

 

The Bow kite bridle is also responsible for allowing you to choose the direction you would like to launch the kite. This clearly puts the Convert in a class of its own amongst a sea of hybrid kites which don’t allow this function. This important function becomes an added safety feature when your kite is sitting next to an obstacle like rocks, a pier, other riders or swimmers.

 

For example: if you want to lift the right facing wing tip just point the right side of the control system directly at the kite and hold until the wing tip rises off of the water. When the kite launches you can easily control how fast or how slow you’d like it to fly.

 

If you want to speed up the relaunch process you can always just grab a leader line instead, flip the kite on its side and shoot it up into the sky. The Convert’s easy relaunch sets a new standard in kite control. Simple. Fast. And at your command.

 

The feature packed Convert comes standard with: Sprint. Our single point inflation system. You can easily inflate the kite by connecting the pump to a single valve.

 

Override 2. The ability to depower on demand by just pushing the control bar away from the rider.

 

The Convert comes with our versatile Powerdrive 2N1 S control system. The 2N1 S control system allows you to ride in either the 2:1 pulley mode or the 1:1 mode with the pulleys disabled.

 

In 2:1 mode the pulleys effectively double the steering, powering and depowering inputs. For the amount of distance you move the control bar you effectively double the reaction on the kite. This creates precision control, rocket fast turning, and puts you in charge of your kite at all times.

 

In 1:1 mode the disabling of the pulleys virtually eliminates all bar pressure and provides a smooth power and depower band. Great for freeriding and unhooked wakestyle riding. The Powerdrive 2N1 S comes with our Bypass leash.

 

If you are looking for an all round freeride kite that will perform in a wide variety of conditions and riding styles. One with an industry leading relaunch system, look no further than the Convert kite from Cabrinha.

The Convert kite from Cabrinha. Kitesurfing has never been easier.

 

Durability >
A new robust construction with transitional strut reinforcements and higher strength materials in the durability prone areas.

The Convert tackles durability with a tough Dacron leading edge, struts, trailing edge and wing tip areas. These areas transition into the canopy with transitional strut reinforcement materials, creating a solid framework around the canopy.

SPRINT Inflation System >
Ease of use has reached a whole new level with the addition of Sprint™ - our unique single point inflation system. Just pull the kite out of the bag, hook the pump to a single valve and inflate the entire kite to the desired pressure. If you’d like to roll up the kite with only the leading edge deflated, a set of lock off clips will ensure that the struts stay inflated.

 

Instant Relaunch >
A combination of our Powerdrive™ 2N1 control system and Cabrinha's bridling makes the Cabrinha Convert one of the fastest launching kites available today. When the kite is leading edge down on the water or snow, turning the control system 90 degrees will raise the wingtip off the surface so you can gently steer the kite into the sky, maintaining control of the power of your kite at all times.

 

Override 2 >
The Override™ method of depower has become the preferred choice from seasoned pros to 1st time riders. It doesn’t get any easier than this.

Just place the control bar in the Override™ mode and the kite will immediately begin to depower and drop from the sky. With Override™ you can avoid many accidents before they happen by maintaining control of the power of your kite at all times.

The Override™ 2 stopper unit provides a place to rest your control bar if you’d like to unspin your lines. When the Override™ stopper unit is seated on its sleeve you can temporarily let go of the control bar and unspin your lines. To place the bar into Override™ mode, you simply push past the stopper unit and the kite will immediately begin to depower and drop from the sky.

 

In the Override™ mode and the kite will immediately begin to depower and drop from the sky. With Override™ you can avoid many accidents before they happen by maintaining control of the power of your kite at all times.

The Override™ 2 stopper unit provides a place to rest your control bar if you’d like to unspin your lines. When the Override™ stopper unit is seated on its sleeve you can temporarily let go of the control bar and unspin your lines. To place the bar into Override™ mode, you simply push past the stopper unit and the kite will immediately begin to depower and drop from the sky.

 

Powerdrive 2N1: Power is nothing without control Lets face it, power is nothing without control. That’s why the Cabrinha Convert comes with Cabrinha's top of the line Powerdrive 2N1 control system. The Powerdrive 2N1 control system is a 2:1 pulley system that increases the effects of your steering and depowering input. For the amount of distance you move the control system you effectively double the reaction on the kite. This creates precision control and puts you in charge of your kite at all times.

 

The Powerdrive 2N1 control system now implements Cabrinha's new forged alloy section with an expanded entry and exit opening for the depower line. This feature increases the ease of bar movement over the depower line even at extreme angles.

 

Pro Span™ Extreme >
The implementation of Pro Span™ Extreme into the Cabrinha Convert has provided Cabrinha with huge gains in the power equation. The flatter arc of the kite now means that the majority of the kite’s surface area is working for you in a lifting capacity. Unlike a classic arc which only uses approximately 50 percent of it’s arc for lifting, the Cabrinha Convert’s main lifting area is expanded to an incredible 80 percent of the kite’s surface area. This means that the smaller, lighter, Cabrinha Convert kites deliver the same power as a larger classic arc kite.

 

Usable Wind Range >
Raw power is useless if there is no way to control it. This is where the Cabrinha Convert shines. The Cabrinha Convert has approximately 30 percent more power range than any classic arc kite. This means that a 12 meter kite, for example, can be powered to the equivalent of a 14 meter by sheeting the control bar towards the rider. At the same time it can be depowered down to the equivalent of a 8 meter just by pushing the bar towards the kite. When the control bar is pushed into Override Mode the kite achieves total depower.

 

Cabrinha Convert Bridle System >
One of the reasons for the Cabrinha Convert's incredible rock solid stability is the simple leading edge bridle. The Cabrinha Convert's bridle delivers on two fronts: Stability and trim. The obvious benefit to the performance of the kite is the way that the bridle fully supports the leading edge of the kite under the constantly changing loads of pressure. This increased stability allows the kite to react to the riders input from the bar without the deformation that can occur with a traditional kite. The other revolutionary feature of the bridle is its ability to drastically change the angle of attack of the kite while keeping equal pressure on all load points. This in turn creates an unprecedented range of power and trim including absolute depower.

The Convert's bridle serves two functions. The most obvious function is the way that it fully supports the flat arc of the kite (also known as Pro Span Extreme). This helps to keep the kite flying rock solid even when riding through choppy water in gusty wind. The second function of the bridle is to allow the kite’s angle of attack (AOA) to radically change. This is the main feature responsible for the Cabrinha Convert's incredible range and depowering capabilities.

 

The bridle even allows for the AOA to reach a zero point where the kite stops pulling altogether. The interesting thing about this bridle is the way that it places equal tension on each attachment point even while depowering. Jelly fishing is not possible with the Cabrinha Convert.

 

The Cabrinha Convert wraps all of these features into one kite to deliver:

• Moderate Aspect Ration
• All-Round Freeride Design
• Durable Construction
• Relaunch on Command
• Moderate Bar Pressure
• Fast Turning
• Convertible 2:1 to 1:1
• Sprint™ Single Point Inflation
• Immediate Depower On Demand
• Simple Fast Relaunch Feature
• Pro Span Extreme™
• HD Bridle
• Override 2™
• Full Contact Strut Connections

Construction:

• Ultralight Dura-Grid™ Leading Edge
• Molded Eva Seam Protectors
• 0.8Mm Tpu Bladders
• Polyester Woven Rip Stop Canopy

The Kite Only Package includes:

• Cabrinha Convert Kite
• Expanding Bag
• Large Pump
• Repair Kit
• Cinch Strap

The Complete Package includes:

• Cabrinha Convert HD Kite
• Expanding Bag
• Large Pump
• Repair Kit
• Cinch Strap
• 25m Flying Lines
• Powerdrive 2N1 Control Bar in 45m/50cm/55cm

	* A Harness is required to fly this kite - click for harnesses >>
	* You can learn how-to setup and fly water relaunchable kites using the Kiteboarding Progression DVD - click for info >>

Wind Range

Cabrinha Convert Wind Range:

Depower Control Bar

Riders of all levels, from pros to newcomers, will all gain substantial advantages from the new Cabrinha Convert. Lets face it, power is nothing without control. The top of the line Powerdrive 2N1 control system is a 2:1 pulley system that increases the effects of your steering and depowering input. For the amount of distance you move the control system you effectively double the reaction on the kite. This creates precision control and puts you in charge of your kite at all times.   The Powerdrive 2N1 control system comes standard with our Override 2 stopper unit. In addition to its hands free spinning feature, the Override 2 stopper integrates our bungeed power adjusters. The easy to use power adjusters puts the trim of your kite easily within reach. This often imitated but never duplicated feature keeps your entire control system simple, streamlined and free of clutter.   The Powerdrive 2N1 control system now implements our new forged alloy section with an expanded entry and exit opening for the depower line. This feature increases the ease of bar movement over the depower line even at extreme angles.   The Powerdrive 2N1 features our adjustable Override™ 2 stopper unit, 2:1 pulley system, bungeed power adjusters, centerline adjustment trim strap, soft embossed EVA grip, a quick release harness loop and a Bypass security leash. Advanced Depower System One of the features responsible for the Convert’s incredible depowering capabilities is it’s 1-2-1 pulley system on the rear lines. This allows the rider to achieve twice the depower for the same amount of distance the bar travels as a normal control system. The 2-1 purchase also enhances turning by exaggerating the differences in line lengths when the bar is turned.   Secure Release Harness Loop The new quick release is a simple and effective way to separate the rider from the kite. The spring loaded action keeps the QR engaged until manual activation is needed. Since activation of the QR will separate the rider from the kite, it is only recommended when separation from the kite is absolutely necessary.

Override: The Override™ security system introduced the concept of Depower on Demand. With Override™ 2 we have once again redefined it. Override’s Depower on Demand is as simple as it gets. Simply push the control bar into the Override mode and the kite will immediately depower and begin to drop from the sky. You can avoid many accidents before they happen by maintaining control of the power of your kite at all times. Learn how the Override Works (7mb) Another useful feature of Override is that you can temporarily let go of the control bar to un-spin your lines. When the Override stopper unit is seated on its sleeve it will temporarily stop the bar from entering the Override mode while you spin you bar to untwist your lines. Override™ 2 Tension Ring The stopper unit is set set to release at a load of approximately 10kg. A tension ring is supplied if you would like to increase the release load. With each click of the ring the tension is increased around the stopper and the release load becomes higher. It should be noted that increased loads will require more force to unseat the stopper and put the control bar into Override mode. Note: The stopper ball is provided as a convienence feature. It is not intended to be used as a permanent stopper in which to ride against. For best results, sheet the control bar up to the ball prior to letting go of the bar to unspin the lines.

Relaunch Assist: The Cabrinha Convert's unique bridle allows the rider to perform a water relaunch by simply pulling on the left or right rear lines. The wingtip will rise out of the water and allow the rider to position the kite into a more secure side launch position. This is all possible without the use of a 5th line or additional wing tip fittings.

Download Product / Instruction Manual (PDF) >>

You can purchase spares for this item here >>

Reviews

Be the first to review this product!

 

Submit a Product Review for this product >>