Description
Harness the power for your traction activities
- waist style harness suitable for all land and water based
activities.
Top of the range waist harness with technical oriented design.
Torsion free construction ensure the best freedom
of movement. The thermoforming is anatomically shaped into
the lumbar area.
Crosslink webbing allows internal straps to run crosswise
in the back area and thus distribute the force evenly over
the
entire
back
area.
A special highlight is extremely soft neoprene
edge, which surrounds the entire harness. The fit is extremely
comfortable whether you are riding in a wetsuit, rash vest
or on bare skin. The best support combined with good flex.
This top level waist harness now comes with
new X-SPINE / CROSS LINK construction This harness combines
a maximum support for the body with a high wearing comfort;
a perfect fit due to the 3D ZONE SHAPE and the inside DUAL
DENSITY foam construction, combined with a maximum on protection
for the lower back musles. Other features include a wide cut,
good load distribution and a generous chest padding for top
riding characteristics.
The Full Protection Hook Mounting protects
from rib injuries and prevents bruising. Reinforced leash
attachment rings
and a rear handle for assistance during launching are
other features that make kiteboarding simply easier.
New safety slider grab handle to attach safety
leash also makes it perfect for
handle pass tricks.
With its closure at the harness hook, the strap only needs
to be adjusted once.
The Push Button Spreader Bar also makes it
easy to get in and out of the harness. The system ensures
optimum safety even under extreme conditions.
Complete with Safety Knife to cut your lines
in case of an emergency.
- X-Spine:
The moulded X-Shape at the back of the harness
guarantees a maximum amount of protection, while giving
the freedom to land all kinds of tricks.
- Dual Density Foam:
The foam, used for the inside
construction has two densities. The soft foam is used in
the centre part of the seat harness, where good fit is essential.
The solid foam applies where protection comes first.
- Internal Flex Belt:
Flexible waist belt with rubber endings to ensure tight
and comfortable fit.
- Push Button Spreader
Bar: The push button supports
the quick assembly of the harness. There is no need to mount
any velcro tapes through buckels. Just hook the metal ring
into the spreader, adjust the webbing and off you go.
- Flex Edge:
While grabbing your board and tweaking out your tricks
the rib's can encounter the harnesses edge. The sides of
the harness is now more flexible on points where the load
distribution allows it.
- Neoprene Belt:
This waist belt is secured on the
frame on the inside of the harness. The stretch in the belt
makes your harness feel comfortable from the moment you
put it on. The Velcro on the belt is positioned in such
a way that it won’t damage your suit, lycra or skin.
- Protection Pad:
This is a solid neoprene padded plate that keeps away the
harness hook from your body. Especially when the spreader
bar moves up quickly.
- Hip Protection:
The double layer foam padding protects your bones and all
other vulnerable parts in this area. Especially if the body
is bend sideways.
- Torsion Free Construction:
The inner part of the harness is made up of different segments
to ensure, that the harness fits perfecty along the backbone.
Less pain - More fun.
- 3D Zone Shape:
Segmented zone shape in all directions supports your backbone
and reduces the chance that the harness will slip upwards
when you hit the water.
- Handle Pass Leash
Slider: A small metal ring
on a rubber coated hande lets the leash slide along the
back of the harness, making hanlde pass tricks easier.
- Belt Garage:
The belt garage keeps any end of the webbing band from flying
around.
- Crosslink Webbing:
Allows internal straps to
run crosswise in the back area and thus distribute the force
evenly over the entire back area.
- Bar Keeper Belt:
The strap construction prevents
the spreader bar from rushing upwards in overpowered situations.
Two
webbing straps run from the bungee belt to the spreader
bar to make sure that the kiter doesn‘t get hurt.
- Soft Neoprene Edges
- 3D Thermo
Moulded Exterior: Anamtomically allowing
ION to shape the harness giving extra support in the lumbar
area.
- Safety Knife: Cuts
flying lines in an emergency.
- Kite Spreaderbar
with protector cover
0%
Interest Finance Option
