Description
High
performance at an affordable price. The Cabrinha Rival
is a freeride design without limits.
Wider
tips and a forgiving rocker gets the board planing and
upwind quickly. The wood core provides bomb proof durability
and liveliness for the life of the board.
The Cabrinha Rival is the perfect first
board as it will get a rider tracking upwind with its easy
to control handling. From there it’ll grow with you
as you quickly progress through the stages.
When it comes to the performance / value
equation, the Cabrinha Rival has no competition. With a
milled Paulownia wood core and
an ABS sidewall construction, the Cabrinha Rival is built
to withstand the elements.
Its flat bottom provides an easy and forgiving
ride in any and all conditions. The Paulownia wood core is responsible for
its flex and dampening through the choppy water. The fast
rocker will
get a rider up on a plane quickly yet allow him or her to
control their speed through the Rival's edge control.
Built to last, the combination of a wood core
and biax glass present a unique blend of weight and durability.
The 6” (15.24 cm) insert pattern also
accepts standard foot straps, Sync backless bindings, or
a wakeboard boot so you can upgrade your straps if needed.
It’s this versatility that makes the
Rival the perfect entry level board that will grow with
your ability.
Paulownia
Wood Core:
Vertically laminated Paulownia stringers produce a high compression
/ lightweight core. Paulownia has one of the highest strength
to weight ratios of all wood species. The result is simple.
Bullet proof, with a smooth consistent flex pattern.
Average density: 310kg/m3
Bi-Axial Fibreglass
Laminate:
A simplified weave ensuring durability with a loose feel.
Hardglass:
A pre-laminated fibreglass thats pre-tensioned and cured under
pressure. We apply this to the board in strategic locations
to increase strength with a minimal increase to the weight.
Top and Bottom Sheet:
A lightweight and tough material.
UV and scratch resistance properties make it perfect for Kiteboard
production.
ABS Rails:
The ABS sidewall is laminated
to the core during the lay-up process. It's designed to increase
the strength while ensuring a smooth, durable and consistent
ride.
Core Profile:
All of Cabrinha's core are produced with CNC milling. This
means that every core is true to their design. Flex, profile
and manufacturing consistency are all exact every time.
Flex Pattern (True
Twin Flex):
A symetric pattern provides and identical flex, forward or
switch, ideal for all types of riding conditions.
Mounting System (Stainless
Steel Inserts):
Based on the industry standard 6 inch (15.24cm) pattern. Cabrinha's
stainless steel inserts are custom made to eliminate pull
out and spinning. Cabrinha's inserts are all 1/4-20 thread
and sized to properly fit the core profiles. They are inserted
from the bottom of the core, glued and are in for good.
Arrangement / Layup (Laminate):
Each board has its own unique layup. Cabrinha have tested
many different laminates to produce the best combination of
strength and weight. The Cores are profiled to dial in the
specific flex for a design. Then the laminate is applied to
support the flex and increase strength.
Cabrinha Rival CO-AX
Footbeds + Straps:
Cabrinha have designed an entirely new component
set to lower the weight and to raise the finish standard
even higher. Cabrinha's new 3D moulded foot pad fits like
a well worn shoe. The dual density EVA will cradle your
foot from side to side and protect it from the impact of
hard landings. The widebody adjustable foot strap is extremely
simple to attach and easy to adjust to a perfect fit.
The CO-AX footstrap is a full coverage, fully
supported footstrap which can quickly adjust to different
foot sizes. The new CO-AX has added padding in the arch for
an even more comfortable ride. It is made with durable nylon,
neoprene and EVA.
Cabrinha 3D CO-AX
Footbeds:
The Rival CO-AX footbeds have been designed
with performance, ease of use, and is lightweight. The
3D shaping
of the footbed cradles the foot and reduces fatigue with
its soft molded EVA. The custom cut grip EVA inlay provides
a solid, no slip feel and the entire footbed is canted
inwards to align the knees. The internal plate is pre-curved
and lightweight.
Cabrinha Wideboy
Adjustable Footstraps:
The widebody adjustable footstrap is designed
to fit a wide range of feet with the best combination of
fit, function, and styling.
The strap features a side mounted EVA that will keep the
strap at all ranges of adjustment. The dual velcro allows
the strap body to be centered on the foot
and also makes mounting easy. This feature also allows the
strap to be left on the board for travelling.
Stance Options:
The stance options provided are design specific based on
the rider size and style. The Rival features a 15/18
footstrap stance to suit the smaller target rider.
The Cabrinha Rival also comes standard with
4 high quality glass fins and a handle.
Features:
- Wide Freeride Design
- Paulowina Wood Core
- 21” (56 CM) / 24” (61 CM) Sync
and Wake Stance Options
- Flat Bottom
Base Components:
- Four 2” inch GFK fins
- Cabrinha Coax adjustable footstraps
- Grab handle
Cabrinha
Rival: 133
x 41cm
Cabrinha Rival:
135 x 43cm
Cabrinha Rival:
145 x 44cm
Fin Configuration:
4-Fin
Weight: 3.2kg
**Price
include footstraps / bindings, fins and grab handle**
Cabrinha
Rival Board Selector:
Email:
info@powerkiteshop.com
