|
The
NEW PARASTORM BUGGY is made to the highest standard in England.
Made from a combination of different High Quality stainless steels
in various states. All bolts under heavy loading are of Aircraft
or Racing specification resulting in superior quality and strength…
Giving you a buggy that is over Three times as strong!
To
be used anywhere by any one, from a beginner to the most experienced
rider…
The
Parastorm buggy is a new concept in Kite Buggying technology.
Using a carefully selected wide range of quality aircraft spec
materials to push the boundaries of radical change of design to
another level.
From
a designer who works for a highly successful Formula 1 team as
a Materials Engineer, they can offer these technological innovations
that can be manipulated and implemented towards buggying.
Technical
Specifications:
- Wheels
- Extra Wide 16/6.5"
- Rear
wheel bearings 15mm, Aircraft speck bolts.
- Made
from various types of Stainless steel
- TIG
welded to the highest standard
- Weight
is 18 Kgs with a 1400mm rear beam
- Variable
back support
- Any
size wheels will fit including 20 inch discs. Bigfoot wheels
require a wide set of forks that are available.
- A
multitude of adapting pieces for different size wheel studs,
12mm as standard using aircraft spec bolts, 15mm & 20mm
available soon.
- 4
height adjustments for multiple rotation and reversible foot
pegs.
- 5
position front fork rake angle adjustments: 0 , 15 , 30 , 45
& 60 degrees.
- Two
positions for the location of the front wheel.
- Front
forks cater for all types of wheels for different applications.
- 0
- 35 degrees rear camber and tow angle adjustment with built
in angle gauges.
- 350
mm of adjustment on the fork neck from 1200mm - 1500mm front
to rear wheel centres
- 6
positions of suspension combined with three spring types available.
- The
rear beam/Axle has Bump Steer that means that when the kite
if fully powered up, it depresses the suspension causing the
rear wheels to turn against the force. This rear wheel steer
enables the buggy to remain in a straight line, as posed to
carving sideways and loosing speed
- Off-settable
rear beam - comes with 1400mm rear beam as standard.
- Various
rear beams available from aluminium, stainless steel to glass
fibre all in a variety of lengths.
- The
seat and bag are made out of the highest quality woven nylon
impregnated onto sheet form PVC, giving outstanding strength
and water proofing. Leg support has been incorporated into the
seat design, giving the rider optimum comfort and support. This
has all been achieved without restricting the users arm movements.
- A
revolutionary new way of fixing the neck of the buggy is achieved
with the aid of two turn screw handles mounted at 45 degrees
to the centre of the material, this gives a set-up time of 10
seconds and no spanners required. The two tubes cross over design
gives four times as much strength as a conventional buggy with
minimal weight gain.
|
