|
Boards > Trampa > Trampa Skate Style Superstar Hubs Landboard > |
|||
Trampa Skate Style Superstar
Hubs All-Terrain Board >>
|
User Rating:
|
DescriptionThe Trampa scrub skate is one of the strongest / lightest setup on the market. Weighing in at an honest 6.0kgs as a standard model it is barely matched by the rivals in performance, weight and durability, and a true world series winner!
The trucks have re-enforced hollow axels and use a simple skate style 14mm kingpin tensioner, mounted on rubber, to adjust the tension of the steering. Heavier riders should expect to bend or sometimes break these trucks after some time, but being 1 kilo lighter in weight than most other trucks, they are excellent value alround.
Shown here wearing Trampa super strong 4 and a half inch, 5 spoke hypa hubs and Primo's 8 inch super light-weight 2 ply alpha tyre with the smartest tyre tread to date!
This model also wears trampa's own camlock bindings, fitted throughout with marine grade stainless steel fixings for durabillity, quality and assurance.
Trampa Deck:
It is specially formulated, and presented in a workable matter in a thread like format, just like cotton. From there, Trampa weave the thread to their desired width, and place it onto a roll. Polished and pre shaped alluminium moulds are used to give the material the dimensions we require.
By varying the layer quantity used, Trampa are able to control the amount of flex and pop in the deck, allowing us to custom make the deck for the customers height, weight, style, rider type and riders abillity.
Water and a very fine sand are used to cut out the decks individually from the mould. The water is pressured at 60,000 Psi. (enough pressure to cut through 9 inch titanium!)
Trampa Skate Truck:
The TRAMPA SKATE base plate has been selected from an existing factory mold and modified for improvement, then stamped with the TRAMPA logo to show a sign of top quality.
For all those top riders out there who insist on their trucks to be super tight, TRAMPA have resolved the issues riders have faced when they come to tighten their trucks and find their kingpin keeps spinning. The TRAMPA base plate holds the kingpin in the correct position allowing the rider to tighten their trucks to their exact steering requirements.
TRAMPA have also designed a special bearing conversion spacer which is perfect in converting the standard 12mm bearings to fit to the 10mm hollow axle. This bearing conversion spacer also acts as the perfect speed washer allowing the hub to fit snug on the axel, giving the wheel the perfect spinning position.
Including the axel nuts and washers, the truck weighs 525 grams each, 1.05Kg per pair. Super light!
Its basically a skate board truck which has been beefed up to give extra strength on the rough terrain. Its also given extended axle's which give the perfect amount of stability for most sized riders.
However many adult sized male kiteboard riders choose to ride these trucks simply because they are 1kg lighter than any other on the market, the fact that they may bend or even break under seriously heavy usage or over time bears no odds to them.
The housing for the Camlock on the top of the plastic strap has been modified to hold the ratchet tightly in its position, this avoids any unwanted movement from the Camlock/strap which has always been a problem with other brands. By locking the Camlock tight encourages the ladder strap to be pulled accurately into the correct position, giving a longer lifespan to the teeth on the ladder and ensuring the rider gets the same binding position every time.
Trampa Superstar Hubs:
Containing just 15% glass fibre and made from the finest DUPONT nylon materials, the natural matt surface finish of the original HYPA hub is striking to the eye and the obvious choice for the weight conscious rider!
Constructed using only the finest fixings available. All TRAMPA parts including these hubs are constructed using Marine grade Stainless steel which has been brushed with Blue bolt paste to ensure the strongest of fixings. All nuts used also have a Nylock sleeve to ensure double quality and secure fixing!
Trampa Tread Tyres: The Trampa Tread tyre has an intelligent grip pattern, housing grip on grip of which we call a progressive grip system (PGS). The grip pattern is wide but still has a joining tread around the centre of the tyre to allow for high top end roll speeds.
Trampa Specifications:
Approximate Weight: 6.0kg
SpecsSpecifications:
Dimensions:
Accessories
For more information on this accessory - click here >>
=======================================
Suitable to fit most skate style truck boards. =======================================
When inflated the central ridge allows for high speed on hard surfaces.
As the ground softens, the tyre digs in and
the side grips come into effect.
=======================================
Reviews
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Copyright © 2013, Powerkiteshop :: All Rights Reserved |
|||
|
Power Kite - Kite Buggy - Land Boards - Kite Board - Kite Surfing - Kiteboarding Wetsuits - Site Map - Visit Power Kite Shop |
Translate Page: | ||